Case Studies

Persistent leaks threatened this high-traffic underground parking. EURAS® Gel Type B was injected under pressure—sealing cracks without disruption.

Chronic leaks threatened this critical water treatment facility. EURAS® Gel Type B was injected under pressure—permanently sealing slabs and galleries.

Chronic leaks reduced capacity in this potable water reservoir. EURAS® Gel Type B was injected under high pressure—restoring integrity without excavation.

Chronic leaks threatened this high-value residential basement. EURAS® Gel Type B was injected under pressure—permanently sealing cracks without demolition.

In an Alpine hydropower station suffering chronic leaks, EURAS® Gel Type B was injected under high pressure—sealing joints and cracks permanently.

Facing chronic leaks in a high-traffic railway tunnel, our team applied EURAS® Gel Type B by high-pressure injection—creating a lasting waterproof barrier.

Active leaks around cooling galleries and pipe penetrations threatened safety and compliance. EURAS® Gel Type B was injected under high pressure, creating a lasting watertight barrier.

When active leaks threatened the valve chamber of this hydropower plant, the EURAS® team responded with high-pressure injection of Gel Type B—sealing the structure in just 48 hours.

Facing widespread leaks in an underground garage near the sea, our team injected over 12,000 kg of EURAS® Gel Type B—sealing cracks and cavities permanently.

Persistent leaks under high reservoir pressure threatened dam safety. Using EURAS® Gel Type B, our team performed deep high-pressure injection—stopping leaks permanently without lowering water levels.

When chronic leaks at the surge chamber–tunnel interface threatened performance, EURAS® Gel Type B was injected under high pressure to create a permanent waterproof barrier.

Persistent water leaks in the penstock galleries of this hydroelectric plant were compromising operations and structural safety. Traditional methods failed — until EURAS® Gel Type B was applied.

A leaking expansion joint (S2–S3) in one of Serbia’s most critical hydroelectric plants was sealed without shutting down operations using EURAS® Gel Type B.